LTP MATTSTONE Sealer - Impregnating Stone Sealer (1 LITRE)

Product Information

Generally, however, sealing grout consists of cleaning and drying the grout surface, applying the grout sealer and waiting for it to dry. It provides a colourless barrier that protects against water, dirt, oil, grease, soot, and limescale stains and marking. Apply the product generously and evenly to the face and edges of the tile and continue to saturate for 3-4 minutes moving the product continuously with the roller or brush to ensure complete coverage.

Impregnating Sealers - Tile Cleaning, Sealing and - LTP

A completely natural matt finish for Travertine, limestone, terracotta, quarry tiles, slate, sandstone, marble, concrete, brick and external paving. More absorbent floors may require further coats and on such floors the product should be generously applied. This sealer is an excellent choice for those who want to keep their stone floor looking its best, as it provides long-lasting protection that makes it easier to clean and maintain.Three easy steps to obtain the best and most enduring finish for floor and wall tiles and grouting: Think beyond sealing, equally important is the cleaning beforehand and the aftercare. LTP Gloss Stone Sealer is an easy-to-apply self-shine acrylic sealer that enhances the colour and texture of your stone surfaces and protects against staining and stubborn dirt. To ensure a good seal, apply the LTP Mattstone at 2-hour intervals until the sealer starts to sit on the surface. For lower porosity floors, 250ml is required for 5 sqm, and for medium porosity floors, 250ml is required for 2 sqm.

LTP Mattstone 5 litre | Tileflair

Its film-forming feature leaves a glossy finish that is perfect for adding a touch of sophistication to your surfaces. Strongly enhances natural colour and appearance of slate tumbled marble, marble, limestone, granite, other types of natural and artificial stone, terrazzo, quarry tiles etc,. LTP Mattstone will help to inhibit oil based stains but such spillages should be wiped up immediately.In addition, you should seal your grout once a year or so to ensure that it is protected, preserved and kept looking great. These sealants will leave a natural finish, whilst delicately enhancing colour and texture and protecting against staining and water damage. Once a good seal is achieved leave the sealer to cure for a minimum of 12 hours to cure, before applying the Ironwax Satin/Gloss. Once the Mattstone sealer has been allowed to fully cure (12 hours), apply 2 coats of Ironwax Satin/Gloss with an hour between coats. On highly absorbent surfaces apply further coats at hourly intervals until the surface is fully saturated.