Black Micro Irrigation Pipe (Tube), 4mm/6mm - 50m

Product Information

Dosatron are probably the UK's best selling water powered injectors. These injector are used in Horticulture and other industries. The recently release Dosatron D3GL Greenline Fertiliser is currently on special introductory offer. Downspray Wire Stake with Shut-Off - These are pre-assembled to save installation time, with an extended length of micro pipe already fitted, a tube adaptor, and a shut-off clip to stop flow when a tree is removed. for connection to the supply pipe, the base and 200mm dia. 650mm long PVC guard tube and an optional cast iron frame and cover.

We sell Plasson water meters from ARAD. We have meters for drinking water with WRAS approval, and also for industrial and Agricultural use The main supply pipe should ideally be laid within 20cm of the location of micro sprays if you have opted for the preassembled sprays on a stake with a short length of micro pipe. The longest length of micro supply pipe we want to use is 30cm. Pipe Stakes and Wall Clips - Available for 19mm, 13mm and 4mm pipes, this secures the pipe in place. Use the stakes to secure the pipe to soil or wall clips to secure the pipe to walls, fences and posts. Our products include Drip irrigation, driplines, drippers, sprinklers, microsprinklers, pop up sprinklers, mini sprinklers, Tap timers, irrigation controllers, solenoid valves, solenoid valve manifolds, skid sprinklers, hose, hose fittings, tap fittings, hose reels, hose trolleys, pumps, tanks, and most irrigation related equipment. To accurately determine how much supply pipe we need for our irrigation system, we can draw a route the pipe will take from the water source to your irrigation system's endpoint(s) on the map we previously created.

Irrigation Hole Punch - Used to pierce holes in the main supply pipe to connect the microtube of the micro sprays to the 13mm irrigation supply pipe. Tricoflex hose has been used extensively in Horticulture, Sports and Amenity industries for many years. TOP TIP: If you pierce a hole in the wrong place, use a micro blanking plug (aka Goof Plug) to close and seal the hole. For edges of paths or placement along a wall or fence, use a 180° (half-circle) Microjet Spray. 180° microjets are the most common spray pattern used for planted areas less than 3 metres wide. We recommend an overlap of between 25%-50% to avoid dry patches.

Main Supply Pipes – A frequently asked question is, “Do I need to take the system in for the winter?”. The simple answer is no. You should, however, do your best to drain the system of excess water to prevent damage from freezing water. Remove all the stop ends in your system and any other connectors at low points that can help drain the excess water system. elbows, tee connectors, stop ends, etc. - Based on the plan's requirements, choose 13mm connectors to guide the pipe around the garden and terminate pipe runs. Anchor and fix the supply pipe in place using pipe stakes and wall clips. The ideal placement of stakes and wall clips for the main supply pipe is one every 50-150cm. Water Timers, filters, and pressure reducers are expensive items and are sensitive to freezing conditions, so take care of them. Remove them from the system and empty them of any water. The best way to empty these items is to hold them upside down and give them a good shake—store them in a dry place, preferably indoors (not in a shed).selling composts and fertilizers, Horticultural sundries and tools.Keen gardeners are also welcome. TOP TIP: Position sprays placed along edges or in corners 2-5 cm from the edge to prevent overspray onto paths, fences and walls. Our range of sprinklers is vast with Hunter Sprinklers, Orbit sprinklers, rolland sprinklers, Naan Sprinklers, Rainbird sprinklers, Toro sprinklers as well as specialist items such as the Manurain sprinkler for slurry and sewage. These sprinklers can be used for Irrigation, Cooling, Propagation, Dust suppression, damping down, and many other uses. Lay the main supply pipe around the area to be watered. The tube will be more manageable if warmed in the sunshine before use. Initially, position it with weights until it relaxes. For many customers and contractors it is preferable to undertake a full or partial installation of a system themselves. We are please to offer a service of design and supply or partial installation for most types of irrigation systems. These systems would be designed to provide the same quality of Irrigation system we would provide in one of our own installations be it a private garden Irrigation system or a Bowling green irrigation system.